German Designed and built the Webasto range of Diesel heaters are used extensively over the globe for Commercial, Recreational and Marine heating. The range has been tested in the most extreme conditions on the globe from the arctic where they are used on construction and mining machinery to bring engine and hydraulic fluids to temperature to alleviate failure of machinery in multiple digit minus temperatures, to some of the most remote locations in outback Australia where they are installed to vehicles that traverse across some of the most gruelling roads in the world taking punishment from thousands of hours of pounding corrugations where both vehicles and internal fittings and appliances must be up to the task to take such abuse.
Webasto STC 2000 Diesel Air Heater Complete Australian Install Kit
The Webasto Air Heater is the ultimate choice for heating the interior of your RV with a combination of efficiency, economy and unmatched reliability.
The heater is thermostatically controlled which means the unit will cut in and out once the ambient temperature falls or raises outside the desired temperature at which the unit has been set so you can be assured the interior of your RV will remain warm and cosy where ever you choose to rest.
The Heaters furnace draws and expels all air/exhaust externally and no spent gasses or fumes are emitted within the vehicle whatsoever. The unit recirculates the RV’s internal air over the body of the furnace which heats the RV. When the air returning back through the body of the heater reaches the set temperature the furnace of the heater will shut down and the fan will continue to recirculate air until the built in temperature control senses that the air has fallen past the set temp and the furnace will commence heating.
The new generation Webasto Heaters are whisper quiet unlike other brands of Diesel heaters and also have unparrelled serviceability and parts availability.
Don’t be fooled by cheaper kits available that do not contain all the parts required to carry out the install.
Our Kit comprises of everything required to carry out a standard heater install down to cable ties and hose clamps. Fuel tanks are available if required. See Webasto Fuel Tank on our website
A locally made heater adaptor plate is supplied with our kit as is an air inlet, air outlet and Webasto ducting.
Fuel pick up stand pipe is also supplied in our kit for installations where an existing diesel tank is present.
This is an Australian stamped heater and the serial number is registered with Webasto Australia so is covered under the Webasto Australia Warranty. Being covered under the Australian warranty means you have the support of Webasto Australia for all warranty and service enquiries.
Unit comes with standard rotary controller. Digital controller is available on our website.